If the integrated (in dropout) sensor has the shape of the sensor in the second picture (Bosch Sensor), then you need the badassBox 4 Bosch X-Set If the Bosch Sensor (second picture) is mounted easily accessible on your chainstay, you only need a badassBox 4 Bosch.
Badass eBikes proudly presents: Das neue badassBox 4 Bosch G4-Set
The badassBox 4 Bosch G4-Set includes all the parts you need to mount the badassBox 4 on your Trek e-bike with Bosch, Fazua or TQ mid-mounted motor and integrated G4 speed sensor:
- badassBox 4 Bosch
- G4 Adapter
- Spoke Magnet with Thumb Screw
With the badassBox 4 Bosch X-Set you not only get all the necessary parts to tune your e-bike in one 'click', but you also save money.
Installation
The integrated Bosch Sensor is located in the area of the dropout.
To get to the sensor you have to dismount the rear wheel.
With the included button head screw you can screw (for this you need a 2.5 mm Allen key) the G4 speed sensor to the G4 adapter (1).
(2) A suitably cut pad made of self-adhesive elastic foam is included as an option. This pad can be glued to the G4 adapter to attach it to the chain stay without the risk of scratches.
With the enclosed cable ties (3), you can mount the G4 adapter including screwed G4 speed sensor at a suitable location on the chain stay (4), where it is possible to slide the badassBox over the adapter.
Slide the badassBox onto the adapter until it clicks into place.
Reinstall the rear wheel.
Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!
